







A free site visit, a check of what your lot allows and a written, line-item price.
Get your free estimateHow Much Does ADU Design & Permitting Cost in Henderson?
ADU design and permitting in Henderson typically runs $12,000 to $28,000 for a full architectural design package plus the city permit set, and most single-story detached units land near the middle of that band at $16,000 to $21,000. That figure covers schematic design, construction drawings, structural and energy documentation, and the submittal package Henderson’s Community Development Department requires. It does not cover plan-check fees paid to the city (budget another $1,800 to $4,200) or construction itself.
We’re Ellery ADU Studio. We quote every project at one written price before any work begins, so the number you see here is a working range, not a teaser. A live person answers our line 24/7 at (833) 632-6140 if you want your specific lot run against these ranges.
Key Takeaways
- Design and permitting for a Henderson ADU: $12,000 – $28,000, most commonly $16,000 – $21,000.
- Henderson plan-check and permit fees add $1,800 – $4,200 on top, paid to the city.
- Garage conversion permit sets cost less to design ($6,500 – $11,000) because the shell already exists.
- Two-story detached units and steep-lot grading can push design costs toward the top of the range.
- Every Ellery quote is a written price before work starts, and we offer a free second opinion on any estimate you already hold.

ADU Design & Permitting Cost Breakdown (2026)
Here’s where the money actually goes on a Henderson ADU permit set. These are 2026 market ranges for the design and permitting phase only, drawings through approved permits, before a single foundation is poured.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Schematic design & site study | $1,800 – $4,500 | Lot survey review, setback check, massing options, one or two design directions |
| Full construction drawing set | $6,500 – $14,000 | Floor plans, elevations, sections, framing, moisture and energy details |
| Structural engineering | $1,500 – $4,000 | Stamped calcs, beam and header sizing, connection details |
| Title 24 energy compliance | $700 – $1,600 | Nevada-adapted energy documentation and compliance report |
| Civil / grading & drainage plan | $1,200 – $3,500 | Site grading, drainage, utility tie-in locations (lighter for flat lots) |
| Plan review & permit coordination | $900 – $2,400 | Submittal, correction-cycle responses, final permit issuance |
| City plan-check & permit fees (paid to Henderson) | $1,800 – $4,200 | Building, electrical, plumbing, mechanical permit fees and plan-check charges |
Add the line items and you land in the $12,000 – $28,000 band. The design and drawing portion (everything except city fees) sits at $10,000 – $24,000. Detached new-construction units tend to the high end because they need full structural and civil work; a garage conversion ADU often uses the existing shell and slab, which cuts drawing and engineering time and pushes the design package down to $6,500 – $11,000.
The biggest variable is slope and lot geometry. Henderson has a lot of lots that were graded when the subdivision went in during the 1990s and 2000s, and some of those pads don’t drain where you’d expect. When we find a drainage issue that needs a civil fix before the city will approve the set, that’s a real line item, not a pad.
What Affects ADU Design & Permitting Pricing in Henderson
Six factors move the number more than anything else. Every one of them shows up on a Henderson lot we’ve worked.
- Lot slope and grading. A flat pad in Green Valley is straightforward. A lot in the foothills near Lake Mead Parkway that drops two feet across the build area needs retaining and drainage detail, which pushes the civil and drawing lines up by $2,000 or more.
- Setback variance. If your proposed ADU can’t meet the standard rear or side setback, you’ll need a variance application, a public notice, and usually a planning hearing. That adds $1,500 – $3,500 in design and coordination time plus a hearing cycle measured in weeks.
- Detached vs. attached vs. conversion. A new detached ADU needs a full structural and civil package. A garage conversion reuses the existing framing and slab, so the drawing set shrinks. A junior ADU or interior conversion is the lightest of the three.
- Two-story design. Second-floor units need floor framing, stair detailing, and additional shear-wall calculations, which adds engineering and drafting time.
- Existing conditions surprises. An as-built survey that disagrees with the county record, a slab thinner than expected, or an existing utility line routed through the build area all require rework before submittal. Every Ellery visit includes a documented photo record of what we found, so the rework is priced from evidence, not a guess.
- Prefab and modular specs. If you’re bringing in an Abodu, Cover, Dvele, Mighty Buildings, Boxabl, Plant Prefab, Tuff Shed, or James Hardie system, the manufacturer’s engineering package changes what the local structural and energy lines need to cover. Ellery specifies and coordinates these systems inside the same single contract, so the cost of aligning their specs with Henderson’s plan-check is quoted up front, not discovered later.
The one thing we won’t price by the hour is trouble. Under Haven Standard Clause 1, your written price covers the scope at signing. If a correction cycle runs longer than expected, that’s our problem, not a change order on your desk.

How to Save on ADU Design & Permitting
There are legitimate ways to trim the Henderson permit budget without cutting the documentation that protects you. Four that work:
- Convert the garage before you build new. A garage conversion typically costs $6,500 – $11,000 in design and permitting versus $16,000 – $21,000 for a detached unit. The shell, slab, and roof already exist, so you pay less for structural and civil work.
- Keep the design within the standard setback envelope. Avoiding a variance saves $1,500 – $3,500 in design time and, more importantly, avoids the delay of a hearing cycle.
- Go single-story when the lot allows it. The engineering savings on a single-story over a two-story run $800 – $2,000 on the structural line, plus faster plan check.
- Handle the site survey early. A clear, current survey up front prevents the correction-cycle rework that inflates costs. We also offer a free second opinion on any written estimate you already hold, which is often the fastest way to catch an underpriced scope before it grows.
Under The Haven Standard, the scope is locked at signing. No door-side upsells, no scope creep. Whatever range we quote is the range you sign.
Frequently Asked Questions About ADU Design & Permitting Cost
How long does Henderson ADU permitting take?
Plan check in Henderson typically runs 6 to 12 weeks for a detached ADU and 4 to 8 weeks for a conversion, plus 4 to 8 weeks of design work before submittal. Correction cycles can add 3 to 6 weeks. Total from first sketch to approved permit: four to seven months. Call (833) 632-6140 for a timeline against your specific lot.
Do I need a structural engineer for a Henderson ADU?
Yes, for any detached or two-story ADU. Structural engineering runs $1,500 – $4,000 on the permit set. A simple garage conversion may not trigger a full structural review, but it still needs energy and code documentation. We confirm the requirement against Henderson’s current plan-check expectations during the site study.
Is it cheaper to design-build or hire a separate architect and builder?
Design-build is usually cheaper overall, not because the design costs less, but because the blame gap disappears. A separate architect and builder each price their side and point at the other when something is off. Ellery’s single contract at one written price covers drawings, permits, and construction. Clients get a written warranty (the 365-Day Done Right Promise) that holds from permit set through final inspection.
Can you design and permit an ADU on a sloped Henderson lot?
Yes. Sloped lots in the foothill subdivisions need extra civil, drainage, and retaining detail, which typically adds $2,000 – $4,500 to the design line. The permitted drawing set accounts for the grading and drainage before the city sees it, which is what prevents the surprise correction cycle.
What does the free second opinion actually cover?
Send us any written estimate you’ve received and we’ll review the scope, the excluded items, and the permit plan line by line, at no charge. We’ll tell you in writing what we found, not what we felt. If the estimate is solid, we’ll say so. If it’s missing structural or energy documentation, that’s the number that’s going to grow.
Why the Design and Permit Set Is the Product
Henderson ADU projects don’t fail at framing. They fail at plan check. The permit set is what the city approves, what the builder builds to, and what the warranty is measured against. That’s why Ellery treats the drawing set as the core deliverable, not a formality on the way to construction.
Every Ellery project is a single contract at a single written price, covering drawings, permits, and construction. The same teams handle ADU Design & Permitting in Henderson, the garage conversion, the new detached build, and the site prep and utilities. If the finished ADU isn’t built to the permitted drawings, we make it right in writing under the 365-Day Done Right Promise. No person on the job is going to disappear behind a handoff when something is off, because there is no handoff.
Our technicians have up to 11 years of experience, and their license number appears on every project page. Every visit includes a documented photo record: the client receives evidence of what was found and what was done, whether it’s a slab dimension or a utility run. That record travels with the project from design through final inspection.
Since 2015, we’ve designed, permitted, and built 900+ ADUs, every one with a written price before work started. If you’re comparing Henderson contractors and want the permit set reviewed by a team who has run hundreds of these through plan check, start with our ADU Design & Permitting in Henderson page or go straight to our home page for the full studio picture.
Frequently Asked Questions We Hear in Henderson
What does a garage conversion ADU cost in Henderson all-in?
Garage conversion ADUs typically run $115,000 – $180,000 all-in, drawings through final inspection, including the permit set, construction, and finishes. Design and permitting alone is $6,500 – $11,000 of that figure. Call (833) 632-6140 for a written price against your garage’s actual dimensions.
Can you come out today to look at my lot?
For most Henderson lots, yes. We schedule site studies within a few days of your call, and reachable lots in Green Valley, Seven Hills, Anthem, and the Lake Las Vegas area are often same-week. You’ll get a documented photo record and a written price before any work begins.
Do you handle the Henderson permit submittal, or do I?
We handle the submittal. That includes filing with the Community Development Department, responding to correction cycles, and coordinating the final permit issuance. The plan-check and permit fees you pay the city are separate from our design line, and are itemized on your written quote.
What prefab and modular systems can you specify?
We specify and coordinate Abodu, Cover, Dvele, Mighty Buildings, Boxabl, Plant Prefab, Tuff Shed, and James Hardie systems inside the same single contract. The local engineering and permit lines are quoted to match whatever factory package you choose, so there’s no surprise cost when the manufacturer’s engineering package lands.
Is a written price really guaranteed before work starts?
Yes, per Haven Standard Clause 1. Every project gets a written price before any work begins. If the scope changes, we issue a revised written price. No door-side upsells, no “call for a quote.” The words you see here are the words on the contract.
Pricing reflects the Henderson market as of 2026. Ellery ADU Studio Henderson offers free estimates – call (833) 632-6140.
What Our Customers Say
"Detached unit in the back garden. Good design, good build quality, and the cost changes were documented and agreed in advance."
- Stefan B."They walked us through setbacks and utility capacity before we paid anything, and told us one of our two options was not going to get approved."
- Mireille T."Every allowance was itemised at the start, so the finish selections did not turn into a surprise at the end."
- Benedict H.









