A Ellery company - serving Henderson, NV
A new modern detached ADU in a backyard
Dvele · Henderson

Dvele New Detached ADU in Henderson, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Henderson

Dvele New Detached ADU in Henderson: What to Know First

A Dvele new detached ADU in Henderson typically takes 9-14 months from signed drawings to final inspection, and all-in pricing for a detached Dvele build runs roughly $285,000-$460,000 depending on unit size, site work, and utility runs. We quote a written price before any work starts, under Haven Standard Clause 1. This page is for Henderson homeowners who already own or are considering a Dvele modular unit and need the site work, permitting, foundation, and installation coordinated by a design-build studio rather than a general contractor juggling subs.

construction workers installing steel beams for a new detached ADU build in Henderson, NV

Call (833) 632-6140

Call (833) 632-6140 for a free estimate. A live person answers, day or night.

How Dvele Products Fail – and How We Fix Them

Dvele builds a genuinely good modular product. What goes wrong on a Henderson installation usually isn’t the module itself – it’s the interface between a factory-built box and a desert lot. Here’s what we see, and how we handle it.

  • Foundation interface failure on the Dvele Q Series. The Q Series arrives with a specific bearing-point schedule, and Henderson’s caliche-heavy soils don’t always cooperate with a standard stem-wall pour. We’ve pulled Q Series units where the steel frame settled 3/8 inch on one corner because the site contractor used a slab-on-grade spec instead of the required pier-and-beam layout. Our fix: soils report before foundation design, and a Dvele-specific anchorage drawing reviewed against their install manual.
  • Utility stub-out misalignment on the Dvele S Series. The S Series ships with plumbing and electrical stubs at fixed locations. Henderson lot grades and the city’s required trench depths for sewer laterals routinely push those stubs out of alignment by 6-18 inches. We re-route the connection in the crawlspace or on the exterior wall rather than cutting into the module’s factory weather barrier – which voids the Dvele warranty on the envelope.
  • Thermal movement at the module seams. Henderson swings from 105°F summer afternoons to 30°F winter nights. On a Dvele two-module configuration, the gasketed seam between boxes expands and contracts more than a single-module install. We see hairline cracks in the drywall tape at the mating line within 18 months. Our fix: a seam detail that allows movement rather than fighting it, plus a documented photo record of the closure before drywall goes on.
  • Monsoon-season roof drainage on flat-profile Dvele roofs. Clark County’s July-August storms dump a half-inch in twenty minutes. Dvele’s low-slope roof profile needs scuppers sized for that intensity, not for average rainfall. We’ve corrected installs where a single 3-inch scupper backed up and pooled water against the parapet. We spec secondary overflow scuppers and verify the roof pitch at the Dvele drawing tolerance before we accept the crane set.
  • HVAC sizing for the Henderson design temperature. Dvele’s factory HVAC package is sized to a national average. At Henderson’s 1% design temperature (roughly 108°F dry-bulb), a Dvele studio or 1-bed can short-cycle and struggle to hold 78°F in late afternoon. We run a Manual J against Henderson conditions and adjust the condenser or add a mini-split head where the factory spec falls short – documented in the written scope, not discovered in August.

Our Dvele New Detached ADU Process

  1. 1
    Site visit and document review. We pull your Dvele order documents, the install manual, and the site survey. We photograph the existing conditions and the proposed pad location. You get the photo record the same week.
  2. 2
    Feasibility and written price. Soils report, setback check against Henderson’s development code (detached ADUs need the rear and side setbacks the lot’s zoning requires – often a variance), and a line-item written price before any work begins. Haven Standard Clause 1.
  3. 3
    Permit set. We prepare the Henderson permit drawings, including the foundation, utility connections, and the Dvele structural anchorage detail. The permit set is the core product here – not an afterthought. We pull the permits and manage the inspection sequence.
  4. 4
    Site prep and foundation. Grading, utilities trenched to Clark County depth requirements, and the pier-and-beam or slab foundation per the soils report. Documented at each stage.
  5. 5
    Crane set and connection. We coordinate the Dvele delivery and crane set, then connect utilities, close the seams, and verify the HVAC against the Manual J. The seam closure gets photographed before drywall.
  6. 6
    Final inspection and the 365-Day Done Right Promise. We walk the finished ADU against the permitted drawings with you. If anything isn’t built to those drawings, we make it right – in writing, for 365 days from completion.

What Dvele New Detached ADU Costs in Henderson

A new two-story ADU over a garage

These are the ranges we quote on Dvele jobs in Henderson. Every one is a written price before work starts.

  • Dvele studio ADU, all-in (module, site prep, foundation, utilities, permits, installation): $285,000-$340,000
  • Dvele 1-bed ADU, all-in: $340,000-$400,000
  • Dvele 2-bed ADU, all-in: $400,000-$460,000
  • Site prep and foundation only (if you’ve already contracted the module directly with Dvele): $48,000-$95,000, driven mostly by utility trench length and soil conditions
  • Permit set and permitting: $9,500-$16,000, depending on variance requirements
  • HVAC correction for Henderson design temperature: $3,800-$9,000

What moves the price: utility distance from the main, caliche removal, setback variance requirements, and whether the Dvele unit is single or multi-module. Call (833) 632-6140 for an exact quote. Estimates are free, and we’ll give a free second opinion on any written estimate you already have.

Why Henderson Homeowners Call Ellery ADU Studio Henderson for Dvele Work

We’re a design-build studio, not a contractor with a Rolodex of subs. On a Dvele job, that means the drawings, the permit set, and the construction sit under one contract at one written price – so when the foundation spec and the Dvele anchorage detail disagree, there’s no designer pointing at the builder. Under Haven Standard Clause 5 (No Surprises), the scope is locked at signing: no door-side upsells, no scope creep.

Our technicians have up to 11 years of experience, and they work on Dvele units often enough to know the S Series stub-out locations and the Q Series bearing schedule without looking them up. If your job involves a different prefab system, we also coordinate Abodu and Cover units within the same single contract.

Every promise is written. The 365-Day Done Right Promise. The written price before any work starts. The documented photo record on every visit – you get evidence of what we found and what we did, not a summary of how it felt. A live person answers calls 24/7, and we’re an independent Dvele service provider – not affiliated with or authorized by Dvele.

FAQs

A compact kitchen inside a new ADU

Small homes that live large

Vaulted ceilings, compact kitchens and private decks: the details that make an ADU feel like a home.

Read our ADU guides
The living room inside a new ADUThe bedroom inside a new ADUThe bathroom inside a new ADUA small deck outside a new ADUA kitchenette inside a converted garageA new bathroom inside a converted garage

Explore more ADU services

Every build below starts the same way: a free site visit and a written price.

Getting started with Ellery in Henderson

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a backyard ADU site with the homeowner

Free site visit

A project lead walks the lot with you, checks what it allows and hands you a written, line-item price. No obligation.

Book a site visit
A building crew carrying lumber to a backyard ADU site

Your Henderson team

A local vetted partner works across Henderson and the towns around it, to the same written standard as every Ellery job.

Areas we serve
A worker protecting the lawn before an ADU build starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need ADU help nationwide? Licensed & insured · free written estimates
Call (833) 632-6140
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Ellery ADU Studio Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch