A Ellery company - serving Henderson, NV
A new modern detached ADU in a backyard
Dvele · Henderson

Dvele ADU Service in Henderson, NV

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Henderson

Why Henderson Homeowners Choose Dvele ADU

We provide independent Dvele ADU service in Henderson – site assessment, foundation and grading, installation, and post-set repairs – with a written price before any work starts. What makes our Dvele work different is that we know the platform’s panelized cassettes and factory-set MEP chases from the inside, and we re-check every connection detail against the Dvele engineering set before finish work goes on.

Contractors installing exterior trim on a new modern detached ADU in Henderson, NV

Call (833) 632-6140

Ellery ADU Studio has operated as a design-build studio since 2015, and we specify and coordinate Dvele systems alongside Abodu, Cover, Mighty Buildings, Boxabl, Plant Prefab, Tuff Shed, and James Hardie inside a single contract at a single written price.

To be clear: we’re an independent Dvele service provider. We have no affiliation, authorization, or warranty relationship with Dvele, and we never claim manufacturer authorization. That independence is the point – it means candid engineering and permit guidance rather than a sales script. A live person answers our line 24/7 at (833) 632-6140.

Why Trust Ellery ADU Studio Henderson for Your Dvele ADU?

The bedroom inside a new ADU

Our technicians have up to 11 years of experience, and they work on Dvele units the way the factory set requires: cassette alignment checked before the crane releases, panel-to-foundation joints re-verified against the anchor schedule, and MEP chase locations compared to the actual utility stubs on the lot. These aren’t repairs you learn from a generic ADU page. A Dvele One, a Dvele Two, and a Dvele Studio series unit each arrive with different wall and floor cassette arrangements, different chase routing, and different finish-coating specs, and treating them as interchangeable is how joint failures start.

We’re also careful about what parts go into a Dvele. Dvele-specific connection hardware, sealants, and panel cassettes come from Dvele’s own supply stream wherever the unit is still held to the factory’s specification. Standard electrical, plumbing, and HVAC components come from regional suppliers that can match the engineered spec on paper, so the part you receive is documented against the drawings rather than swapped for whatever was available.

Every project runs under The Haven Standard – written price before work starts, a documented photo record on every visit, and a 365-Day Done Right Promise backed in writing. Every project we’ve taken on since 2015, including 900+ ADUs designed, permitted, and built, has carried a written price before work began and a photo record when work was complete. And if you’re holding a written estimate from another company, we’ll give you a free second opinion on it.

Common Dvele ADU Problems We Fix in Henderson

Dvele’s panelized approach is a strong system, but it’s unforgiving of small errors at the set. Here are the failures we see most often on Henderson lots, and what’s usually behind them.

  • Racked cassette panels and sealant gaps at the joints. Panels that took a rough ride on the delivery rack, or were set before the footing was fully verified, show up as air and water infiltration once the unit is buttoned up and tested. The gap isn’t a finish problem – it’s a set-day tolerance problem, and it has to be corrected at the joint, not covered over.
  • Factory MEP chases that miss the Henderson utility stubs. The chase is routed at the factory to a generic plan; your lot has its actual water, sewer, and electrical stub locations. When they don’t line up, the unit fails rough-in inspection until the routing is corrected in the field before the walls close.
  • Anchor schedules engineered to a generic wind and seismic basis. Southern Nevada wind exposure and Henderson’s expansive soils aren’t the same as the basis the schedule may have been drawn to. Footings and anchors have to be reconciled to the actual site, and that reconciliation belongs in the permit set, not in a change order later.
  • Factory-coated exterior panels chalking early under Henderson’s UV load. Summer highs here routinely hit 105-115°F, and monsoon-season dust and flash rain work on the same surfaces. Coating and flashing detail has to be specified for this climate and then held to during installation; a generic finish spec will look tired years ahead of schedule.
  • Two-story Dvele Two units raising height-setback and privacy issues with neighboring two-story homes. Many Henderson lots back onto shared block walls, and the adjacent structure’s second floor changes what the setback and screening plan needs to be. This is a site-assessment finding, and it’s cheaper to answer before the set is ordered than after.

A typical Dvele set lands on a Henderson lot where panels are craned off the delivery racks and assembled over a footing system that has to match both the factory anchor schedule and local expansive-soil and wind requirements. The recurring problem is what happens at the panel-to-panel and panel-to-foundation joints – racked cassettes, a sealant bead that didn’t fully bond, or a chase that misses the stub. A qualified local pro re-checks the connection details against the Dvele engineering set, re-seals and re-anchors to spec, re-stubs the utilities, and walks the unit through inspection before finish work goes on.

Dvele Parts & Our Repair-vs-Replace Approach

Parts sourcing on a Dvele breaks into two categories, and we treat them differently. Connection hardware, sealants, and panel cassettes specific to the Dvele system should come from Dvele’s own supply stream wherever the unit is still under the factory’s specification – substituting an aftermarket bracket or a different sealant chemistry at a cassette joint is how a small repair becomes an infiltration call a year later. Electrical, plumbing, and HVAC components are a different matter; a quality regional supplier can meet the engineered spec, and we document what was specified against what was installed. We don’t claim to stock Dvele parts locally, because we don’t – each job is sourced to its spec.

Contractors installing exterior trim on a new modern detached ADU in Henderson, NV

Our repair-or-replace call is honest and documented. Where a Dvele panel or module has been compromised, targeted repair and re-sealing is usually the right answer. Module replacement only makes sense when structural panels or the chassis itself are damaged – not when a sealant bead failed. Call (833) 632-6140 to schedule a free estimate and get that call in writing.

Our Dvele Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the unit against the Dvele engineering set – cassette joints, anchor schedule, MEP chase routing, and exterior coating and flashing detail – and document what we find with photos, not a summary of how it felt.
  2. 2
    Site assessment and foundation review. We confirm the footing system against Henderson’s expansive-soil and wind requirements before any repair or installation proceeds. If the site has a problem the drawings don’t address, you hear it now.
  3. 3
    Repair or installation. Connection details are re-checked, joints re-sealed and re-anchored to spec, and utilities re-stubbed where chases missed. Dvele-specific parts come from Dvele’s supply stream; standard MEP components are sourced to the engineered spec.
  4. 4
    Test and inspection walk. We walk the unit through air and water testing and the rough-in inspection before finish work goes on. A unit that fails at this stage gets corrected, not covered up.
  5. 5
    Warranty and handoff. You receive the written scope, the photo record, and the 365-Day Done Right Promise in writing. If the finished ADU isn’t built to the permitted drawings, we make it right.

Dvele Products We Service & Install in Henderson

We service and install across the Dvele platform: the Dvele One single-story panelized detached ADU, the Dvele Two two-story stacked-module ADU, the Dvele Studio series open-plan studio unit, and Dvele’s one- and two-bedroom detached configurations. Each has its own cassette arrangement and chase routing, and each gets assessed against its own engineering set rather than a generic checklist. If you’re still choosing a configuration, we can walk a Henderson lot and tell you which of these actually fits – setbacks, block-wall proximity, and footing conditions included – before you order a set.

We Also Service These Brands

Dvele is one platform among several we specify and coordinate, and our depth doesn’t depend on any single brand. We also work with Abodu and Cover, along with Mighty Buildings, Boxabl, Plant Prefab, Tuff Shed, and James Hardie. If your Dvele sits next to an Abodu unit on the same lot, or you’re comparing a Cover unit against a Dvele One, we can speak to both systems and their sequencing on a Henderson lot.

FAQs – Dvele ADU Service in Henderson

The bathroom inside a new ADU

Book Your Dvele Service in Henderson, NV

Whether you’re sighting a Dvele set for a first time or correcting joints and chases on one that’s already in the ground, the next step is a written scope and a written price. Call (833) 632-6140 to schedule your free estimate – a live person answers around the clock, and we’ll come back with a documented photo record and a fixed price before any work starts.

Written by the team at Ellery ADU Studio Henderson.

Small homes that live large

Vaulted ceilings, compact kitchens and private decks: the details that make an ADU feel like a home.

Read our ADU guides
A new modern ADU with wood claddingThe living room inside a new ADUA new two-story ADU over a garageA compact kitchen inside a new ADUThe sitting area and efficiency kitchen of a junior ADUA bedroom and desk inside a converted garage

Explore more ADU services

Every build below starts the same way: a free site visit and a written price.

Getting started with Ellery in Henderson

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a backyard ADU site with the homeowner

Free site visit

A project lead walks the lot with you, checks what it allows and hands you a written, line-item price. No obligation.

Book a site visit
A building crew carrying lumber to a backyard ADU site

Your Henderson team

A local vetted partner works across Henderson and the towns around it, to the same written standard as every Ellery job.

Areas we serve
A worker protecting the lawn before an ADU build starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need ADU help nationwide? Licensed & insured · free written estimates
Call (833) 632-6140
Local Service Coverage

Request a Free Estimate in Henderson

Tell us what you need - Ellery ADU Studio Henderson responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch